HOME | jmhgrids

LEADERS IN CONSTRUCTION AND FARM GRIDS

ABOUT

JMH Grids was established in Orange in 2012 manufacturing farm style cattle grids. We offer a range of farm style cattle grids in various widths in both heavy duty unrated and fully engineered and rated construction. We also provide a range of shaker grids to the construction market and service some of the industry leaders. We have also produced a range of custom made grids and wheel wash setups to suit crushing plants and landscape supply yards. We deliver grids on our own vehicles across most of NSW and also have a network of freight companies to allow us to deliver cattle grids competitively up and down the east coast and into major centres Australia wide.

2012

Year Established

200+

Grids Delivered

5

Tried and Tested Products

10+

Repeat Customers

ABOUT

CUSTOM GRIDS AND OTHER FABRICATION

Custom and Wheel Wash Grids

We have produced ultra heavy duty grids to suit wheel wash pits at landscape and crushing yards. The grids have been designed with lift points and so they don't get stuck in the sludge making it easy to clean underneath. A ramp can be incorporated on either end to transition the trucks from the road level down through the water pit. The grids can be hot dip glavanised if required.

2013-04-13_10-30-52_897

ramp1_edited

1359578104621_edited

IMG_2917[1]_edited

PROJECTS

FARM GRIDS

3m Heavy Duty Unrated

Galvanised

Our 3m heavy duty unrated grids are our most budget friendly grid. Grids are now made of galvanised material and at 2.95m wide there is still plenty of room to get a truck over the grid providing they have a relatively straight approach and departure. Suitable for almost all low speed farm applications. The grids are 2.95m x 1.95m x .28m and feature 70x50x3mm RHS top rails. The grids have 5 Joists and a bearer on either side where the grid contacts the ground. The grids can be purchase with or without wings.

3m grid: $1300 plus GST

Wings: $300 plus GST

4m Heavy Duty Unrated

Galvanised

Our 4m heavy duty unrated grids are our most popular grid. The grids are now made out of Galvanized material. Suitable for almost all low speed farm applications. The grids are 4m x 1.95m x .3m and feature 80x60x3mm RHS top rails. The grids have 5 Joists and a bearer on either side. The grids can be purchase with or without wings.

4m grid: $1700 plus GST

Wings: $300 plus GST

4m Fully Engineered

Galvanised

We also supply fully engineered grids. We have a standard design 4m x 1.95m x .32m grid which will take weights of up to 8.5t per axle (25.5t per tri axle group) at 80kmh. We have also produced various other types of grids to support customer axle loading requirements

4m grid: $2800 plus GST

Wings: $300 plus GST

CONSTRUCTION GRIDS

3m Shaker Rumble Grid

Shaker Grid for work site. Sold into construction, demolition, roadworks and various other sites for both permanant and temporary installations

Fast becoming a legal requirement.

Grid dimensions are 3.1m x 2m x .16m

The grids are manufacture out of heavy duty RHS with 75x50 rails underneath. 100x50 rails around the outside and 75x75x10mm angle across the top.

$2200 plus GST

4m Easy Move Shaker Rumble Grid

Shaker Grid for work site. Sold into construction, demolition, roadworks and various other sites for both permanant and temporary installations

Fast becoming a legal requirement.

Grid dimensions are 4m x 2m x .16m

The grids are manufacture out of heavy duty RHS with 75x50 rails underneath. 100x50 rails around the outside and 75x75x10mm angle across the top.

$2400 plus GST

4m Full Width Shaker Rumble Grid

Shaker Grid for work site. Sold into construction, demolition, roadworks and various other sites for both permanent and temporary installations

Fast becoming a legal requirement.

Grid dimensions are 4m x 2m x .16m

The grids are manufacture out of heavy duty RHS with 75x50 rails underneath. 100x50 rails around the outside and 75x75x10mm angle across the top.

$2700 plus GST

FARM GRIDS

CONSTRUCTION GRIDS

DELIVERY

Delivery Direct to Site

We deliver across most of NSW and into QLD and Victoria. We have runs going most areas every 6-8 weeks and into Sydney and the Hunter Valley every fortnight. We keep our freight costs down by combining customers orders in the same area. However if you need a grid in a hurry we can arrange this to. Our vehicles allow us to deliver direct to site and in most cases we can unload ourselves.

Interstate Delivery

We have accounts and contacts with several major freight companies. We use these when sending grids into most major centers to keep the costs down for our customers. We drop the grids direct to their depots on our end and if you are able to pickup from the depot it will keep costs down.